io.chainflip-broker/crypto-swap MCP Server

The io.chainflip-broker/crypto-swap MCP server provides native cross-chain swaps across Bitcoin, Ethereum, Solana, Polkadot, Tron, and Arbitrum. It supports swap flows that include quoting, executing swaps, and tracking swap progress.

🛠️ Key Features

Native cross-chain swaps
Supported networks: Bitcoin, Ethereum, Solana, Polkadot, Tron, Arbitrum
Quote, swap, and track capabilities

🚀 Use Cases

Performing cross-chain swaps between supported networks
Getting swap quotes before execution
Monitoring swaps after they are initiated

⚡ Developer Benefits

A single MCP server interface for multiple chains
Clear workflow stages: quote → swap → track
Server scope explicitly aligned to the listed networks

Chainflip Broker as a Service

A remote MCP server that enables AI agents to perform cross-chain cryptocurrency swaps through the Chainflip decentralized exchange. No API key required to get started.

Tools

Tool	Description
`list_assets`	Discover all available assets with tickers, networks, decimals, minimum amounts, and live USD prices
`get_quotes`	Get swap quotes using human-readable amounts (e.g., 1.5 BTC)
`get_native_quotes`	Get swap quotes using native unit amounts (e.g., 150000000 satoshis)
`start_swap`	Execute a cross-chain swap and receive a deposit address
`start_dca_swap`	Execute a DCA swap that splits into multiple sub-swaps to reduce price impact on large trades
`check_status`	Track swap progress through its stages: Waiting, Receiving, Swapping, Sending, Sent, Completed

Prompts

Prompt	Description
`swap-assistant`	Guided workflow that walks through asset discovery, quoting, swap execution, and status monitoring

Supported Assets

Assets are identified as ticker.network, for example btc.btc, eth.eth, usdc.eth, sol.sol, or usdt.tron. Call list_assets to see the full list of supported assets and their current prices.

Configuration

Connect to the remote MCP server at:

code

https://chainflip-broker.io/mcp

Transport: Streamable HTTP

No authentication is required. An optional API key can be provided for partner attribution.

Documentation

For detailed human-readable documentation, visit docs.chainflip-broker.io/resources/ai-documentation.

Agent Skill

For agent frameworks that consume SKILL.md plugins (OpenClaw, Nous Hermes, Claude Code), this repo ships a ready-to-use skill at skills/chainflip-swap/SKILL.md. It wraps the tools above into a guided swap workflow with natural-language triggers. The skill manifest is skills/index.json.

The skill is published on ClawHub. Install it in OpenClaw with:

bash

openclaw skills install @baas/chainflip

Usage Example

Call list_assets to see available assets
Call get_quotes with source asset, destination asset, and amount to preview the swap
Call start_swap with the destination and refund addresses to get a deposit address
Send funds to the deposit address
Call check_status with the returned swap ID to monitor progress

sourceAsset	string	required	Source asset identifier (e.g., 'btc.btc', 'eth.eth', 'usdc.eth')
destinationAsset	string	required	Destination asset identifier (e.g., 'eth.eth', 'btc.btc', 'sol.sol')
amount	number	required	Amount to swap in human-readable format (e.g., 1.5 for 1.5 BTC)
apiKey	string \| null	optional	Optional partner API key.

sourceAsset	string	required	Source asset identifier (e.g., 'btc.btc', 'eth.eth', 'usdc.eth')
destinationAsset	string	required	Destination asset identifier (e.g., 'eth.eth', 'btc.btc', 'sol.sol')
destinationAddress	string	required	Destination address on the target chain
refundAddress	string	required	Refund address on the source chain, used if minimum price cannot be met
numberOfChunks	integer	required	Number of sub-swaps for DCA (Dollar Cost Averaging). Must be >= 1.
chunkIntervalBlocks	integer \| null	optional	Optional delay between DCA sub-swaps in state-chain blocks (1 block = 6 seconds). Defaults to 2 blocks (12 seconds).
minimumPrice	number \| null	optional	Optional minimum accepted price as a destination-per-source ratio (e.g., for a btc.btc to eth.eth swap, 28.5 means 1 BTC gets at least 28.5 ETH). When omitted, automatically calculated from current pool prices with 2% slippage tolerance. Set to 0 to accept any price.
apiKey	string \| null	optional	Optional partner API key.

sourceAsset	string	required	Source asset identifier (e.g., 'btc.btc', 'eth.eth', 'usdc.eth')
destinationAsset	string	required	Destination asset identifier (e.g., 'eth.eth', 'btc.btc', 'sol.sol')
destinationAddress	string	required	Destination address on the target chain
refundAddress	string	required	Refund address on the source chain, used if minimum price cannot be met
minimumPrice	number \| null	optional	Optional minimum accepted price as a destination-per-source ratio (e.g., for a btc.btc to eth.eth swap, 28.5 means 1 BTC gets at least 28.5 ETH). When omitted, automatically calculated from current pool prices with 2% slippage tolerance. Set to 0 to accept any price.
apiKey	string \| null	optional	Optional partner API key.

sourceAsset	string	required	Source asset identifier (e.g., 'btc.btc', 'eth.eth', 'usdc.eth')
destinationAsset	string	required	Destination asset identifier (e.g., 'eth.eth', 'btc.btc', 'sol.sol')
amount	string	required	Amount to swap in native units (e.g., '100000000' for 1 BTC in satoshis)
apiKey	string \| null	optional	Optional partner API key.

Chainflip Broker as a Service

io.chainflip-broker/crypto-swap MCP Server

🛠️ Key Features

🚀 Use Cases

⚡ Developer Benefits

Topics

get_quotes

start_dca_swap

check_status

list_assets

start_swap

get_native_quotes

Chainflip Broker as a Service

Tools

Prompts

Supported Assets

Configuration

Documentation

Agent Skill

Usage Example

Install

Remote endpoint